EasyManua.ls Logo

Endress+Hauser HART Proline t-mass I 300 - Accessories; Device-specific accessories

Endress+Hauser HART Proline t-mass I 300
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Proline t-mass I 300 HART Accessories
Endress+Hauser 159
14 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
14.1 Device-specific accessories
14.1.1 For the transmitter
Accessories Description
Proline 300 transmitter Transmitter for replacement or storage. Use the order code to define the following
specifications:
Approvals
Output
Input
Display/operation
Housing
Software
Order code: 6X3BXX
Installation Instructions EA01286D
Remote display and
operating module
DKX001
If ordered directly with the measuring device:
Order code for "Display; operation", option O "Remote display 4-line illum.;
10 m (30 ft) Cable; touch control"
If ordered separately:
Measuring device: order code for "Display; operation", option M "W/o, prepared
for remote display"
DKX001: Via the separate product structure DKX001
If ordered subsequently:
DKX001: Via the separate product structure DKX001
Mounting bracket for DKX001
If ordered directly: order code for "Accessory enclosed", option RA "Mounting
bracket, pipe 1/2""
If ordered subsequently: order number: 71340960
Connecting cable (replacement cable)
Via the separate product structure: DKX002
Further information on display and operating module DKX001→  186.
Special Documentation SD01763D
External WLAN antenna External WLAN antenna with 1.5 m (59.1 in) connecting cable and two angle
brackets. Order code for "Accessory enclosed", option P8 "Wireless antenna wide
area".
The external WLAN antenna is not suitable for use in hygienic
applications.
Further information on the WLAN interface →  67.
Order number: 71351317
Installation Instructions EA01238D
Protective cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.
Order number: 71343505
Installation Instructions EA01160D

Table of Contents

Related product manuals