Endress+Hauser HART Proline t-mass I 300 - For the Sensor

Accessories Proline t-mass I 300 HART
160 Endress+Hauser
14.1.2 For the sensor
Accessories Description
Mounting boss Order code for "Accessory enclosed"
• Option PC "Mounting boss, G1""
• Option PD "Mounting boss, 1" NPT"
• Option PE "Mounting boss, G¾""
• Option PF "Mounting boss, ¾" NPT"

Can be ordered separately: order code DK6MB
Cold tap (ambient
pressure)
Order code for "Accessory enclosed"
• Option PR "Cold tap G1", ambient pressure"
• Option PS "Cold tap 1" NPT, ambient pressure"
• Option PT "Cold tap G¾", ambient pressure"
• Option PU "Cold tap ¾" NPT, ambient pressure"

Can be ordered separately: order code DK6ML
Hot tap (low pressure) Order code for "Accessory enclosed"
• Option PG "Hot tap G1", low pressure max. 4.5 bar/65 psig"
• Option PH "Hot tap 1" NPT, low pressure max. 4.5 bar/65 psig"
• Option PK "Hot tap G¾", low pressure max. 4.5 bar/65 psig"
• Option PL "Hot tap ¾" NPT, low pressure max. 4.5 bar/65 psig"

Mounting set contains mounting boss (process connection), sensor
connection with safety chain and ball valve. To insert or remove the sensor at
process pressures up to max. 4.5 barg (65 psi).

If the accessory is ordered separately, individual combinations can be
selected. Order code DK6003
Hot tap (medium
pressure)
Order code for "Accessory enclosed"
• Option PI "Hot tap G1", medium pressure max. 16 bar/230 psig"
• Option PJ "Hot tap 1" NPT, medium pressure max. 16 bar/230 psig"
• Option PM "Hot tap G¾", medium pressure max. 16 bar/230 psig"
• Option PN "Hot tap ¾" NPT, medium pressure max. 16 bar/230 psig"

Mounting set contains mounting boss (process connection), sensor
connection, ball valve and extractor assembly. To insert or remove the sensor
at process pressures up to max. 16 barg (230 psi).

If the accessory is ordered separately, individual combinations can be
selected. Order code DK6003
Flow conditioner

Can be ordered separately: order code DK6004
Available for the following pipe diameters:
• DN 80 (3")
• DN 100 (4")
• DN 150 (6")
• DN 200 (8")
• DN 250 (10")
• DN 300 (12")
Available for the following process connections:
• PN10, EN1092-1
• PN16, EN1092-1
• PN25, EN1092-1
• PN40, EN1092-1
• Cl.150, ASME B16.5
• Cl.300, ASME B16.5
• 10K, JIS B2220
• 20K, JIS B2220

Screws and seals are not included in the delivery.