Endress+Hauser HART Proline t-mass I 300 - Prerequisites

Proline t-mass I 300 HART Operation options
Endress+Hauser 59
7.4.2 Prerequisites
Computer hardware
Hardware Interface
CDI-RJ45 WLAN
Interface The computer must have an RJ45
interface.
The operating unit must have a
WLAN interface.
Connection Standard Ethernet cable with RJ45
connector.
Connection via Wireless LAN.
Screen Recommended size: ≥12" (depends on the screen resolution)
Computer software
Software Interface
CDI-RJ45 WLAN
Recommended operating
systems
• Microsoft Windows 8 or higher.
• Mobile operating systems:
• iOS
• Android

Microsoft Windows XP is supported.

Microsoft Windows 7 is supported.
Web browsers supported • Microsoft Internet Explorer 8 or higher
• Microsoft Edge
• Mozilla Firefox
• Google Chrome
• Safari
Computer settings
Settings Interface
CDI-RJ45 WLAN
User rights Appropriate user rights (e.g. administrator rights) for TCP/IP and proxy server
settings are necessary (for adjusting the IP address, subnet mask etc.).
Proxy server settings of the
Web browser
The Web browser setting Use a Proxy Server for Your LAN must be
deselected .
JavaScript JavaScript must be enabled.

If JavaScript cannot be enabled:
enter http://192.168.1.212/basic.html in the address line of the Web
browser. A fully functional but simplified version of the operating menu
structure starts in the Web browser.

When installing a new firmware version: To enable correct data display,
clear the temporary memory (cache) of the Web browser under Internet
options.
Network connections Only the active network connections to the measuring device should be used.
Switch off all other network
connections such as WLAN.
Switch off all other network
connections.
In the event of connection problems: →  136