Endress+Hauser HART Proline t-mass I 300 - Process Variables

Operation Proline t-mass I 300 HART
126 Endress+Hauser
‣
Output values
→  129
‣
Totalizer
→  127
10.4.1 Process variables
The contains all the parameters needed to display the current measured values for each
process variable.
Navigation
"Diagnostics" menu → Measured values → Process variables
‣
Process variables
Mass flow
→  126
Corrected volume flow
→  126
Volume flow
→  126
FAD volume flow
→  127
Energy flow
→  127
Temperature
→  127
Density
→  127
Flow velocity
→  127
Heat flow
→  127
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow that is currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  86).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow that
is currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  86).
Signed floating-point
number
Volume flow – Displays the volume flow that is
currently measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→  86).
Signed floating-point
number