Diagnostics and troubleshooting Proline t-mass I 300 HART
154 Endress+Hauser
Parameter Description User interface Factory setting
Extended order code 3 Shows the 3rd part of the extended order
code.
The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string –
Device revision Shows the device revision with which the
device is registered with the HART
Communication Foundation.
2-digit hexadecimal number 0x1
Device ID Shows the device ID for identifying the
device in a HART network.
6-digit hexadecimal number –
Device type Shows the device type with which the
measuring device is registered with the
HART Communication Foundation.
2-digit hexadecimal number 0x1160 (for t-mass 300/500)
Manufacturer ID Shows the manufacturer ID device is
registered with the HART Communication
Foundation.
2-digit hexadecimal number 0x11 (for Endress+Hauser)
11.13 Firmware history
It is possible to flash the firmware to the current version or the previous version using
the service interface.
For the compatibility of the firmware version with the previous version, the installed
device description files and operating tools, observe the information about the device
in the "Manufacturer's information" document.
The manufacturer's information is available:
• In the Download Area of the Endress+Hauser web site: www.endress.com →
Downloads
• Specify the following details:
• Text search: Manufacturer's information
• Media type: Documentation – Technical Documentation
To Next Page
Loading...
