Endress+Hauser HART Proline t-mass I 300 - User Interface

Proline t-mass I 300 HART Operation options
Endress+Hauser 63
7.4.5 User interface
2
1
3
A0029418
1 Function row
2 Local display language
3 Navigation area
Header
The following information appears in the header:
• Device name
• Device tag
• Device status with status signal →  142
• Current measured values
Function row
Functions Meaning
Measured values Displays the measured values of the measuring device
Menu
• Access to the operating menu from the measuring device
• The structure of the operating menu is the same as for the local display

For detailed information on the structure of the operating menu, see the Operating
Instructions for the measuring device
Device status Displays the diagnostic messages currently pending, listed in order of priority
Data
management
Data exchange between PC and measuring device:
• Device configuration:
• Load settings from the device
(XML format, save configuration)
• Save settings to the device
(XML format, restore configuration)
• Logbook - Export Event logbook (.csv file)
• Documents - Export documents:
• Export backup data record
(.csv file, create documentation of the measuring point configuration)
• Verification report
(PDF file, only available with the "Heartbeat Verification" application package)
• Firmware update - Flashing a firmware version
Network
configuration
Configuration and checking of all the parameters required for establishing the connection
to the measuring device:
• Network settings (e.g. IP address, MAC address)
• Device information (e.g. serial number, firmware version)
Logout End the operation and call up the login page
Navigation area
If a function is selected in the function bar, the submenus of the function open in the
navigation area. The user can now navigate through the menu structure.