Endress+Hauser HART Proline t-mass I 300 - Technical data; Application

Proline t-mass I 300 HART Technical data
Endress+Hauser 163
15 Technical data
15.1 Application
The measuring device is intended only for the flow measurement of gases.
To ensure that the device remains in proper operating condition for its service life, use the
measuring device only for media against which the process-wetted materials are
sufficiently resistant.
15.2 Function and system design
Measuring principle Mass flow measurement based on thermal measuring principle.
Measuring system The device consists of a transmitter and a sensor.
The device is available as a compact version:
The transmitter and sensor form a mechanical unit.
For information on the structure of the device →  14