Endress+Hauser HART Proline t-mass I 300 - WLAN configuration

Commissioning Proline t-mass I 300 HART
108 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Separator A local display is provided. Select decimal separator for
displaying numerical values.
• . (point)
• , (comma)
. (point)
Backlight One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
• Order code for "Display;
operation", option O
"Separate 4-line display,
illum.; 10m/30ft cable;
touch control"
Switch the local display
backlight on and off.
• Disable
• Enable
–
* Visibility depends on order options or device settings
9.5.4 WLAN configuration
The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN settings
‣
WLAN settings
WLAN
→  109
WLAN mode
→  109
SSID name
→  109
Network security
→  109
Security identification
→  109
User name
→  109
WLAN password
→  109
WLAN IP address
→  109
WLAN MAC address
→  109
WLAN passphrase
→  109
Assign SSID name
→  109
SSID name
→  109