Endress+Hauser HART Proline t-mass I 300 - Page 107

Proline t-mass I 300 HART Commissioning
Endress+Hauser 107
Parameter Prerequisite Description Selection / User
entry
Factory setting
Decimal places 3 A measured value is specified
in the Value 3 display
parameter.
Select the number of decimal
places for the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
–
Value 4 display A local display is provided. Select the measured value that
is shown on the local display.
For the picklist, see
the Value 1 display
parameter
(→  100)
–
Decimal places 4 A measured value is specified
in the Value 4 display
parameter.
Select the number of decimal
places for the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
–
Display language A local display is provided. Set display language. • English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык
(Russian)
• Svenska
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• ةّيبَرَعْلا (Arabic)
*
• Bahasa Indonesia
• ภาษาไทย (Thai)
*
• tiếng Việt
(Vietnamese)
• čeština (Czech)
English
(alternatively, the
ordered language is
preset in the device)
Display interval A local display is provided. Set time measured values are
shown on display if display
alternates between values.
1 to 10 s –
Display damping A local display is provided. Set display reaction time to
fluctuations in the measured
value.
0.0 to 999.9 s –
Header A local display is provided. Select header contents on local
display.
• Device tag
• Free text
–
Header text In the Header parameter, the
Free text option is selected.
Enter display header text. Max. 12 characters
such as letters,
numbers or special
characters (e.g. @,
%, /)
–