Endress+Hauser HART Proline t-mass I 300 - Page 100

Commissioning Proline t-mass I 300 HART
100 Endress+Hauser
Navigation
"Setup" menu → Display
‣
Display
Format display
→  100
Value 1 display
→  100
0% bargraph value 1
→  101
100% bargraph value 1
→  101
Value 2 display
→  101
Value 3 display
→  101
0% bargraph value 3
→  101
100% bargraph value 3
→  101
Value 4 display
→  101
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Format display A local display is provided. Select how measured values
are shown on the display.
• 1 value, max. size
• 1 bargraph + 1
value
• 2 values
• 1 value large + 2
values
• 4 values
–
Value 1 display A local display is provided. Select the measured value that
is shown on the local display.
• Temperature
• Mass flow
• Corrected volume
flow
• FAD volume flow
*
• Volume flow
• Energy flow
*
• Heat flow
*
• Density
• Flow velocity
• Pressure
• 2nd temperature
delta heat
*
• Electronic
temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
*
• Current output 2
*
• Current output 3
*
–