Endress+Hauser HART Proline t-mass I 300 - System Values; Totalizer Submenu

Proline t-mass I 300 HART Operation
Endress+Hauser 127
Parameter Prerequisite Description User interface
FAD volume flow The Air or compressed air option is
selected in the Measurement
application parameter.
Displays the FAD volume flow that is
currently calculated.
Dependency
The unit is taken from the FAD volume
flow unit parameter (→  86).
Signed floating-point
number
Energy flow The Energy option is selected in the
Measurement application parameter.
Shows the energy flow currently
calculated.
Signed floating-point
number
Temperature – Displays the temperature that is
currently measured.
Dependency
The unit is taken from the
Temperature unit parameter
(→  87).
Signed floating-point
number
Density – Shows the density currently calculated. Signed floating-point
number
Flow velocity – Shows the flow velocity currently
calculated.
Signed floating-point
number
Heat flow The Energy option is selected in the
Measurement application parameter
parameter.
Shows the heat flow currently
calculated.
Signed floating-point
number
10.4.2 System values
The System values submenu contains all the parameters needed to display the current
measured values for every system value.
Navigation
"Diagnostics" menu → Measured values → System values
‣
System values
Electronic temperature
→  127
Parameter overview with brief description
Parameter Description User interface
Electronic temperature Indication of the current temperature of the electronics. Signed floating-point number
10.4.3 "Totalizer" submenu
The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Totalizer value 1 to n
→  128
Totalizer overflow 1 to n
→  128