Endress+Hauser HART Proline t-mass I 300 - Advanced settings; Using the parameter to enter the access code

Proline t-mass I 300 HART Commissioning
Endress+Hauser 103
9.5 Advanced settings
The Advanced setup submenu together with its submenus contains parameters for
specific settings.
Navigation to the "Advanced setup" submenu
The number of submenus and parameters can vary depending on the device version.
Certain submenus and parameters in these submenus are not described in the
Operation Instructions. Instead a description is provided in the Special Documentation
for the device (→ "Supplementary documentation" section).
Navigation
"Setup" menu → Advanced setup
‣
Advanced setup
Enter access code
→  103
‣
Totalizer 1 to n
→  103
‣
Display
→  105
‣
WLAN settings
→  108
‣
Configuration backup
→  110
‣
Administration
→  111
9.5.1 Using the parameter to enter the access code
Navigation
"Setup" menu → Advanced setup
Parameter overview with brief description
Parameter Description User entry
Enter access code Enter access code to disable write protection of parameters. Max. 16-digit character string comprising
numbers, letters and special characters
9.5.2 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable
→  104
Unit totalizer 1 to n
→  104