Endress+Hauser HART Proline t-mass I 300 - Page 153

Proline t-mass I 300 HART Diagnostics and troubleshooting
Endress+Hauser 153
Serial number
→  153
Firmware version
→  153
Device name
→  153
Order code
→  153
Extended order code 1
→  153
Extended order code 2
→  153
Extended order code 3
→  154
ENP version
→  154
Device revision
→  154
Device ID
→  154
Device type
→  154
Manufacturer ID
→  154
Parameter overview with brief description
Parameter Description User interface Factory setting
Device tag Shows name of measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /).
–
Serial number Shows the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
–
Firmware version Shows the device firmware version installed. Character string in the format
xx.yy.zz
–
Device name Shows the name of the transmitter.

The name can be found on the
nameplate of the transmitter.
Character string comprising
numbers, letters and special
characters (#16)
–
Order code Shows the device order code. Character string composed of
letters, numbers and certain
punctuation marks (e.g. /).
–
Extended order code 1 Shows the 1st part of the extended order
code.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –