Endress+Hauser HART Proline t-mass I 300 - Via remote display and operating module DKX001

Technical data Proline t-mass I 300 HART
186 Endress+Hauser
Via remote display and operating module DKX001
The remote display and operating module DKX001 is available as an optional extra
→  159.
• The measuring device is always supplied with a dummy cover when the remote
display and operating module DKX001 is ordered directly with the measuring
device. Display or operation at the transmitter is not possible in this case.
• If ordered subsequently, the remote display and operating module DKX001 may not
be connected at the same time as the existing measuring device display module.
Only one display or operation unit may be connected to the transmitter at any one
time.
A0026786
 48 Operation via remote display and operating module DKX001
Display and operating elements
The display and operating elements correspond to those of the display module →  185.
Housing material
Transmitter housing Remote display and operating module
Order code for "Housing" Material Material
Option A "Aluminum, coated" AlSi10Mg, coated AlSi10Mg, coated
Cable entry
Corresponds to the choice of transmitter housing, order code for "Electrical connection".
Connecting cable
→  34
Dimensions
Information on the dimensions:
"Mechanical construction" section of the "Technical Information" document.
Remote operation →  65
Service interface →  66
Supported operating tools Different operating tools can be used for local or remote access to the measuring device.
Depending on the operating tool used, access is possible with different operating units and
via a variety of interfaces.