Endress+Hauser HART Proline t-mass I 300 - Page 81

Proline t-mass I 300 HART Commissioning
Endress+Hauser 81
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Mol% Ar – Enter amount of substance for
the gas mixture.
Ar = Argon
0 to 100 % –
Mol% C2H4 – Enter amount of substance for
the gas mixture.
C
2
H
4
= ethylene
0 to 100 % –
Mol% C2H6 – Enter amount of substance for
the gas mixture.
C
2
H
6
= ethane
0 to 100 % –
Mol% C3H8 – Enter amount of substance for
the gas mixture.
C
3
H
8
= propane
0 to 100 % –
Mol% CH4 – Enter amount of substance for
the gas mixture.
CH
4
= methane
0 to 100 % –
Mol% Cl2 – Enter amount of substance for
the gas mixture.
Cl
2
= chlorine
0 to 100 % –
Mol% CO – Enter amount of substance for
the gas mixture.
CO = carbon monoxide
0 to 100 % –
Mol% CO2 – Enter amount of substance for
the gas mixture.
CO
2
= carbon dioxide
0 to 100 % –
Mol% H2 – Enter amount of substance for
the gas mixture.
H
2
= hydrogen
0 to 100 % –
Mol% H2O – Enter amount of substance for
the gas mixture.
H
2
O = water
0 to 20 % –
Mol% H2S – Enter amount of substance for
the gas mixture.
H
2
S = hydrogen sulfide
0 to 100 % –
Mol% HCl – Enter amount of substance for
the gas mixture.
HCl = hydrogen chloride
0 to 100 % –
Mol% He – Enter amount of substance for
the gas mixture.
He = helium
0 to 100 % –
Mol% Kr – Enter amount of substance for
the gas mixture.
Kr = krypton
0 to 100 % –
Mol% N2 – Enter amount of substance for
the gas mixture.
N
2
= nitrogen
0 to 100 % –
Mol% n-C4H10 – Enter amount of substance for
the gas mixture.
n-C
4
H
10
= n-butane
0 to 100 % –