Endress+Hauser Proline Promass 83 - Page 16

3 Block MEASURED VARIABLES Device Functions Proline Promass 83 MODBUS RS485
16 Endress+Hauser
UNIT VOLUME
FLOW
MODBUS register:
Data type:
Access:
0402
2103
Integer
read/write
For selecting the unit for displaying the volume flow (volume/time).
The unit you select here is also valid for:
• Current output
• Frequency output
• Relay switch points (limit value for volume flow, flow direction)
• Low flow cut off
Options:
Metric:
0 to 3 = cubic centimeter → cm
3
/s; cm
3
/min; cm
3
/h; cm
3
/day
4 to 7 = cubic decimeter → dm
3
/s; dm
3
/min; dm
3
/h; dm
3
/day
8 to 11 = cubic meter → m
3
/s; m
3
/min; m
3
/h; m
3
/day
12 to 15 = milliliter → ml/s; ml/min; ml/h; ml/day
16 to 19 = liter → l/s; l/min; l/h; l/day
20 to 23 = hectoliter → hl/s; hl/min; hl/h; hl/day
24 to 27 = megaliter → Ml/s; Ml/min; Ml/h; Ml/day
US:
28 to 31 = cubic centimeter → cc/s; cc/min; cc/h; cc/day
32 to 35 = acre foot → af/s; af/min; af/h; af/day
36 to 39 = cubic foot → ft
3
/s; ft
3
/min; ft
3
/h; ft
3
/day
40 to 43 = fluid ounce → oz f/s; oz f/min; oz f/h; oz f/day
44 to 47 = gallon → gal/s; gal/min; gal/h; gal/day
88 to 92 = kilo gallon → Kgal/s; Kgal/min; Kgal/h; Kgal/day
48 to 51 = million gallon → Mgal/s; Mgal/min; Mgal/h; Mgal/day
52 to 55 = barrel (normal fluids: 31.5 gal/bbl) → bbl/s; bbl/min; bbl/h; bbl/day
56 to 59 = barrel (beer: 31.0 gal/bbl) → bbl/s; bbl/min; bbl/h; bbl/day
60 to 63 = barrel (petrochemicals: 42.0 gal/bbl) → bbl/s; bbl/min; bbl/h;
bbl/day
64 to 67 = barrel (filling tanks: 55.0 gal/bbl) → bbl/s; bbl/min; bbl/h; bbl/day
Imperial:
68 to 71 = gallon → gal/s; gal/min; gal/h; gal/day
72 to 75 = mega gallon → Mgal/s; Mgal/min; Mgal/h; Mgal/day
76 to 79 = barrel (beer: 36.0 gal/bbl) → bbl/s; bbl/min; bbl/h; bbl/day
80 to 83 = barrel (petrochemicals: 34.97 gal/bbl) → bbl/s; bbl/min; bbl/h;
bbl/day
Factory setting: Country-dependent (m
3
/h or US-Mgal/day)
UNIT VOLUME
MODBUS register:
Data type:
Access:
0403
2104
Integer
read/write
For selecting the unit for displaying the volume.
The unit you select here is also valid for: Pulse weighting (e.g. m
3
/p)
Options:
0 to 6 = metric → cm
3
; dm
3
; m
3
; ml; l; hl; Ml Mega
7 to 16 = US → cc; af; ft
3
; oz f; gal; Mgal; bbl (normal fluids); bbl (beer);
bbl (petrochemicals); bbl (filling tanks);
22 = Kgal
17 to 20 = Imperial → gal; Mgal; bbl (beer); bbl (petrochemicals)
Factory setting: m
3
! Note!
The unit of the totalizers is independent of your choice here. The unit for each
totalizer is selected separately for the totalizer in question.
Function description
MEASURED VARIABLES → SYSTEM UNITS → CONFIGURATION