Endress+Hauser Proline Prosonic Flow 93 Function Manual

PROline Prosonic Flow 93 FOUNDATION Fieldbus 6 Block TOTALIZERS
Endress+Hauser 45
6.1 Group TOTALIZER (1...3)
6.1.1 Function group: CONFIGURATION
TOTALIZERS D
Þ
TOTALIZER 1 DAA
Þ
CONFIGURATION 300
ß
TOTALIZER 2 DAB
Þ
CONFIGURATION 300
ß
TOTALIZER 3 DAC
Þ
CONFIGURATION 300
Function description
TOTALIZERS → TOTALIZER (1...3) → CONFIGURATION
The function descriptions below apply to totalizers 1...3; the totalizers are independently configurable.
ASSIGN
(3000)
Use this function to assign a measured variable to the totalizer.
Options:
OFF
VOLUME FLOW CH1
VOLUME FLOW CH2
VOLUME FLOW AVERAGE
VOLUME FLOW SUM
VOLUME FLOW DIFFERENCE
Factory setting:
VOLUME FLOW CH1
 Note!
• The totalizer in question is reset to “0” as soon as the selection is changed.
• If you select “OFF”, this function (ASSIGN) is the only function shown in this
function group.

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English