Endress+Hauser Proline Prosonic Flow 93 - PROFIBUS-PA System Architecture

7 Block BASIC FUNCTION PROline Prosonic Flow 93 FOUNDATION Fieldbus
64 Endress+Hauser
SENSOR TYPE
(6881)
 Note!
This function is only available if “OFF” was not selected in the MEASUREMENT
function (6880, see Page 63).
Use this function to select a sensor type.
The options in this function depend on the measurement method selected in
the MEASUREMENT function (6880, see Page 63).
Options:
(if “CLAMP ON” was selected in the MEASUREMENT function)
W-CL-05F-L-B
W-CL-1F-L-B
W-CL-2F-L-B
P-CL-05F-L-B
P-CL-1F-L-B
P-CL-2F-L-B
P-CL-05F-M-B
P-CL-1F-M-B
P-CL-2F-M-B
U-CL-2F-L-A
Options:
(if “INSERTION” was selected in the MEASUREMENT function)
W-IN-1F-L-B
Options:
(if “SOUND VELOCITY LIQUID” was selected in the MEASUREMENT function)
P-CL-1S-L-B
P-CL-1S-M-B
Options:
(if “SOUND VELOCITY PIPE” or “WALL THICKNESS” was selected in the
MEASUREMENT function)
P-CL-4W-L-B
Factory setting:
W-CL-2F-L-B
Function description
BASIC FUNCTION → SENSOR DATA (CH1...CH2) → SENSOR PARAMETER