Endress+Hauser Proline Prosonic Flow 93 Function Manual

5 Block USER INTERFACE PROline Prosonic Flow 93 FOUNDATION Fieldbus
24 Endress+Hauser
5.1 Group CONTROL
5.1.1 Function group: BASIC CONFIGURATION
USER INTERFACE C
Þ
CONTROL CAA
Þ
BASIC CONFIGURATION 200
Function description
USER INTERFACE → CONTROL → BASIC CONFIGURATION
LANGUAGE
(2000)
Use this function to select the language for all texts, parameters and
messages shown on the local display.
Options:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
DANSK
NORSK
SVENSKA
SUOMI
BAHASA INDONESIA
JAPANESE (syllabary)
Factory setting:
Depends on country, see factory setting Page 76 ff.
 Note!
If you press the
 keys at startup, the language defaults to “ENGLISH”.
DISPLAY DAMPING
(2002)
Use this function to enter a time constant defining how the display reacts to
severely fluctuating flow variables, either very quickly (enter a low time
constant) or with damping (enter a high time constant).
User input:
0...100 seconds
Factory setting:
1 s
 Note!
Setting the time constant to 0 seconds switches off damping.
CONTRAST LCD
(2003)
Use this function to optimise display contrast to suit local operating conditions.
User input:
10...100%
Factory setting:
50%

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English