Endress+Hauser Proline Prosonic Flow 93 Function Manual

3 Transducer Blocks (transmission blocks) PROline Prosonic Flow 93 FOUNDATION Fieldbus
106 Endress+Hauser
3.8 FOUNDATION Fieldbus parameters of the
Transducer Blocks
The following table provides you with a description of all the specified FOUNDATION
Fieldbus parameters of the Transducer Blocks. The E+H-specific parameters are
explained from Page 109 onwards.
FOUNDATION Fieldbus parameters (Transducer Blocks, transmission blocks)
Parameter Write access
with operating
mode
(MODE_BLK)
Description
ST_REV read only Displays the revision status of the static data.
 Note!
The revision status parameter is incremented on each
modification of static data.
TAG_DESC AUTO - OOS Entry of a user-specific text of max. 32 characters for unique
identification and assignment of the block.
Factory setting:
(_____) no text
STRATEGY AUTO - OOS Parameter for grouping and thus faster evaluation of blocks.
Grouping is carried out by entering the same numerical value in
the STRATEGY parameter of each individual block.
Factory setting:
0
 Note!
These data are neither checked nor processed by the Transducer
Blocks.
ALERT_KEY AUTO - OOS Entry of the identification number of the plant unit.
This information can be used by the fieldbus host system for
sorting alarms and events.
User input:
1...255
Factory setting:
0

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English