Endress+Hauser Proline Prosonic Flow 93 Function Manual

7 Block BASIC FUNCTION PROline Prosonic Flow 93 FOUNDATION Fieldbus
68 Endress+Hauser
DEVIATION ARC
LENGTH
(6895)
 Note!
This function is not available unless “INSERTION” is set in the MEASUREMENT
function (6880, see Page 63) and “DUAL PATH” was selected in the SENSOR
CONFIGURATION function (6882, see Page 65).
Use this function to enter a deviation value for the arc length.
User input:
5-digit floating-point number, including unit and sign (e.g. +2.0000 mm)
Factory setting:
0 mm
DEVIATION PATH
LENGTH
(6896)
 Note!
This function is not available unless “INSERTION” is selected in the
MEASUREMENT function (6880, see Page 63).
Use this function to enter a deviation value for the path length.
User input:
5-digit floating-point number, including unit and sign (e.g. +2.0000 mm)
Factory setting:
0 mm
Function description
BASIC FUNCTION → SENSOR DATA (CH1...CH2) → CALIBRATION DATA

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English