Endress+Hauser Proline Prosonic Flow 93 - Connecting the Measuring Unit

6 Block TOTALIZERS PROline Prosonic Flow 93 FOUNDATION Fieldbus
48 Endress+Hauser
6.2 Group HANDLING TOTALIZERS
TOTALIZERS D
Þ
TOTALIZER 1 DAA
ß
TOTALIZER 2 DAB
ß
TOTALIZER 3 DAC
ß
HANDLING TOTALIZERS DJA
Þ
Handling totalizer functions
Function description
TOTALIZERS → HANDLING TOTALIZERS → Handling totalizer functions
RESET ALL
TOTALIZERS
(3800)
Use this function to reset the totals
(including all overflows) of the totalizers (1...3) to “0” (= RESET).
Options:
NO
YES
Factory setting:
NO
FAILSAFE MODE
(3801)
Use this function to define the common response of all totalizers (1...3) to error.
Options:
STOP
The totalizer is paused until the fault is rectified.
ACTUAL VALUE
The totalizers continue to count based on the current measured flow value. The
fault is ignored.
HOLD VALUE
The totalizer continues to count the flow is based on the last valid flow value
(before the fault occurred).
Factory setting:
STOP