CR825 and CE875 Instant Issuance System User’s Guide 89
147: Topping foil no tag found
The embosser cannot use the topping foil installed.
1. Open the embosser and remove the topping foil cartridge.
2. Install new topping foil.
3. Replace the cartridge, and then close and lock the embosser.
Driver-Only Message
The following message is issued by the Card Printer Driver if you send a print job to the CR825 or
CE875 instant issuance system using the driver. The Card Printer Driver does not support the
CR825 and CE875 systems. The message displays on the PC that sent the card print job. It does
not display on the printer LCD.
518: Unable to print.
The driver does not support the printer you have selected. Contact your authorized service
representative for assistance.
To Next Page
Loading...
