CR825 and CE875 Instant Issuance System User’s Guide A-1
Appendix A: CE875 Instant
Issuance System
This appendix provides information about the CE875 instant issuance
system.
About the Embosser
The CE875 system consists of a card printer and the CEM embosser. The CE875 system can print
cards and then emboss and indent characters on the card. The embosser creates the raised
lettering and numbering that is on the front and back of most financial or debit cards.
The embosser contains an embossing wheel and topping and indent ribbon cartridges. The
embossing wheel can have up to 75 punch and die (emboss) or punch and anvil (indent) pairs. A
second wheel option allows for up to 75 additional emboss characters. Multiple font choices and
a variety of special characters are available for the embossing wheel. Refer to “Embosser
Configuration Label” on page A-5 for more information about identifying the embosser options.
Printer
Embosser
Multi-Hopper
Single-Hopper System
Multi-Hopper System
To Next Page
Loading...
