CR825 and CE875 Instant Issuance System User’s Guide A-5
Embosser Configuration Label
The embosser configuration label shows the embosser name, serial number, configuration, and
date and country of assembly.
The configuration label provides
information that is useful when
requesting service. It also helps you
know which components were installed
when the embosser was manufactured.
Additional labels may be attached to
indicate options installed by the dealer
or sales group after the embosser was
manufactured.
The embosser configuration label is
located inside the embosser on the
lower enclosure. To view the label,
unlock and open the embosser supplies
access door and locate the label inside.
Option Configuration Code
Type Set 001=Single Embosser
002=Double Embosser
Additional Type X=None
N=Tilde
C=Tilde and Cedilla
H=Large Gothic
S=Special
Topping Foil X=None
T=ToppingFfoil
Indent X=None
I=Indent
To Next Page
Loading...
