A-4 CE875 Instant Issuance System
Inside the Embosser
Printer Lock Lever The lever locks the printer to the embosser. Slide the lever to
the left to unlock the components. Slide the lever to the right
to lock the components together.
Manual Advance Knob The manual advance knob allows you to move the card in the
card track to clear a card jam.
Indent Ribbon Cartridge The indent ribbon cartridge holds the indent ribbon supply.
Reject Tray The reject tray holds up to five unfinished cards or cards that
were not processed properly. Empty the reject tray regularly
to prevent card jams. Refer to “Empty the Embosser Reject
Tray” on page A-9.
Topping Foil Cartridge The topping foil cartridge holds the topping foil supply.
Indent Ribbon
Cartridge
Topping Foil
Cartridge
Reject Tray
Manual Advance
Knob
Printer Lock
Lever
To Next Page
Loading...
