CR825 and CE875 Instant Issuance System User’s Guide 1
Chapter 1: Introduction
About This Manual
This manual provides user information for the Entrust Datacard™ CR825™ and CE875™ Instant
Issuance System. The manual includes:
An overview of printer components and options, and a description of the system label.
How to use the printer, including how to power the printer on and off, how to use the front
panel and LCD menus, how to print a test card, how to load and replace supplies, and the
basics of card processing.
How to perform routine maintenance and troubleshooting tasks.
An additional Installation and Administrator’s Guide is available for use by administrators or other
professionals responsible for setting up the printer. Refer to the Owner’s Library CD.
Intended Audience
The manual is intended for the printer operator who is responsible for printing cards, loading and
replacing supplies, maintaining the printer, and troubleshooting error conditions.
Technical Support
Use the following to contact Entrust Datacard Technical Phone Support.
Americas +1 800.328.3996 or
+1 952.988.2316
EMEA (Europe, Middle East, Africa) +44 1489555627
Asia Pacific +852 2821 0126
To Next Page
Loading...
