38 Using the Printer
6. Install the retransfer film.
a. Slide the yellow supply spool onto the
cartridge until it clicks into place. The
supply roll can go on only one way and
fits only on the correct side of the
cartridge.
b. Route the film around the rollers on
the cartridge. A diagram on the
cartridge shows the correct routing
pattern.
c. Slide the empty silver take-up spool
onto the cartridge until it clicks into
place.
d. Turn the take-up spool
counterclockwise just enough to take up
any slack in the film.
To Next Page
Loading...
