© EPRAD Incorporated
REPORT STATUS Command (continued)
See the eCNA-10 Status Record in section 6.9 for a detailed description of the parameters.
RST Command & Response Example
Command
CMD,RST,0,641<CR><LF>
Response
RSP,RST,0,0,ENA,IDL,OK,0,NO,NO,D1V,D1V,NO,NO,NO,NO,NO,NO,NO,NO,NO,0,0,0,0,0,7,BPN,0,Between Shows,OK,6717<CR><LF>
Note: For testing purposes, the don’t care “??” characters can be used in the command instead of a checksum.
105
eCNA-10 Operation and Installation Manual Version 1.270-00
To Next Page
Loading...