© EPRAD Incorporated
EVENT Log (continued)
U
Note: To control the unsolicited Event Logs, the client must use the CFG Configuration
command.
To disable the Log Event messages send:
Command: CMD,CFG,0,LOGOFF,Y,<CHECKSUM OR ??><CR><LF>
Response: CMD,CFG,0,0,725<CR><LF>
To enable the send Logged Events send:
Command: CMD,CFG,0,LOGON,Y,<CHECKSUM or ??><CR><LF>
Response: RSP,CFG,0,0,725<CR><LF>
This configuration flag is saved in battery RAM.
111
eCNA-10 Operation and Installation Manual Version 1.270-00
To Next Page
Loading...