© EPRAD Incorporated
Message 2: Lamp Status
“” Zero-length string, until a response has been received from the device.
“Lamp_On” Lamp is on.
“Lamp_Off” Lamp is off.
“Lamp_Status_Error” Cannot get status from device.
Message 3: Dowser Status
“” Zero-length string, until a response has been received from the device.
“Douser_Open” Dowser is open.
“Douser_Close” Dowser is closed.
“Douser_Status_Error” Cannot get status from device.
Message 4: Macro Status
“” Zero-length string, until a response has been received from the device.
Macro Name/Number Macro name or number from remote device.
“Macro_Status_Error” Cannot get status from device.
Message 5: Input Select Status
“” Zero-length string, until a response has been received from the device.
Input Name/Number Selected input name or number from remote device.
“InputSel_Status_Error” Cannot get status from device.
Message 6 through 10: Undefined
“” Zero-length string, until a response has been received from the device.
160
eCNA-10 Operation and Installation Manual Version 1.270-00
To Next Page
Loading...