Safety and Regulatory Approvals
Conforms to ANSI/UL Standard 60950-1
Certified to CSA Standard C22.2 No. 60950-1
IECEE CB SCHEME Certified
Complies with the following regulatory standards for product safety, electromagnetic compatibility
(EMC) and environmental requirements:
IEC 60950-1: 2005 (2nd Edition)
EMC Directive 2004/108/EC
IEC/CISPR 22: 1997, +A1: 2000, +A2: 2002
IEC/CISPR 24: 1997, +A1: 2001, +A2: 2002
EN 55022: 1998, +A1: 2000, +A2: 2003
EN 55024: 1998, +A1: 2001, +A2: 2003
FCC CFR47 Part 15
AS/NZS CISPR22: 2004
ICES-003, Issue-4
ETL Listed, File No. 3161934
Safety Statement
This equipment is manufactured in accordance with the requirements of the international standard
IEC60950-1, ICES-003 Class A, EN 55022:95, IEC61000. These safety standards impose important
requirements on the use of critical safety components, materials, and isolation in order to protect the
user or operator from risk of electric shock. It is therefore important to fully comply with the
instructions found in the safety and installation document (PR021S Rev. 0) included with the
equipment.
Installation Instructions
# Before installing, operating, or servicing this equipment, read this manual thoroughly and retain it
for future reference
# Installation should only be performed by qualified personnel
# All warnings and precautionary statements on the eCNA-10 and other system devices as well as in
the accompanying documentation must be observed
# All instructions for operating this equipment must be followed precisely
Safety Indication on the Product
This symbol is intended to alert the
operator that parts inside this cabinet
may involve risk of electrical shock.
This symbol is intended to alert the
operator to the presence of important
operating and servicing instructions in
technical documentation for this
equipment.
ii
eCNA-10 Operation and Installation Manual Version 1.270-00
To Next Page
Loading...