Epson RC180 - Page 196

Maintenance 8. Trouble Shooting
RC180 Rev.17
184
No. Message Remedy Note 1 Note 2
2022
Stack failure. Required data not found
on the stack.
Rebuild the project.
2023
Stack failure. Unexpected tag found on
the stack.
Rebuild the project.
2030
System failure. Drive unit quantity is
beyond the maximum count.
Restore the controller configuration.
2031
System failure. Robot number is
beyond the maximum count.
Restore the controller configuration.
2032
System failure. Task number
compliance error.
Rebuild the project.
2033
System failure. Too many errors.
Remedy the errors occurring frequently.
2040
Thread failure.
Failed to create the thread.
Reboot the controller.
2041
Thread failure.
Thread creation timeout.
Reboot the controller.
2042
Thread failure.
Thread termination timeout.
Reboot the controller.
2043
Thread failure.
Thread termination timeout.
Reboot the controller.
2044
Thread failure.
Daemon process timeout.
Reboot the controller.
2045
Thread failure.
Task continuance wait timeout.
Reboot the controller.
2046
Thread failure.
Task stop wait timeout.
Reboot the controller.
2047
Thread failure.
Task startup wait timeout.
Reboot the controller.
2050
Object file operation failure.
Object file size is beyond the allowable
size.
Rebuild the project.
2051
Object file operation failure.
Cannot delete the object file during
execution.
Reboot the controller.
2052
Object file operation failure.
Cannot allocate the memory for the
object file.
Reboot the controller.
2053
Object file update.
Updating the object file.
Perform the same processing after a
while. Rebuild the project.
2054
Object file operation failure.
Synchronize the project.
Function ID failure.
Synchronize the files of the project.
Rebuild the project.
2055
Object file operation failure.
Synchronize the project.
Local variable ID failure.
Synchronize the files of the project.
Rebuild the project.
2056
Object file operation failure.
Synchronize the project.
variable ID failure.
Synchronize the files of the project.
Rebuild the project.
2057
Object file operation failure.
Synchronize the project. Global
Preserve variable ID failure.
Synchronize the files of the project.
Rebuild the project.
2058
Object file operation failure. Failed to
calculate the variable size.
Synchronize the files of the project.
Rebuild the project.