Epson RC180 - Page 223

Maintenance 8. Trouble Shooting
RC180 Rev.17 211
No.
Message
Remedy
Note 1
Note 2
3283 TextAlign was not specified.
TextAlign property setting value is not
specified in GSet statement.
This error occurs when the control is
other than a text box. Refer to GUI
Builder 5.0 manual “TextAlign Property”
and specify a proper setting value.
3284 WindowState was not specified.
WindowState property setting value is
not specified in GSet statement.
Refer to GUI Builder 5.0 manual
“WindowState Property”
and specify a
proper setting value.
3285 J1FLAG was not specified.
Specify 0 or 1, or an expression for
J1Flag value.
3286 J2FLAG was not specified.
Specify 0 or 1, or an expression for
J2Flag value.
3289 areaID was not specified.
Area number is not specified in
InsideBox and InsidePlane
function.
Specify an approach check area number
which returns status by an integer from 1
to 15.
3300
External definition symbol was
included. (Not in use)
3301
Version of linked OBJ file does not
match.
Not all project files are complied in the
same version. Perform the rebuild.
Rebuild the project.
3302
Linked OBJ file does not match the
compiled I/O label.
The project configuration has been
changed. Rebuild the project.
3303
Linked OBJ file does not match the
compiled user error label.
The project configuration has been
changed. Rebuild the project.
3304
Linked OBJ file does not match the
compiled compile option.
The project configuration has been
changed. Rebuild the project.
3305
Linked OBJ file does not match the
compiled link option.
The project configuration has been
changed. Rebuild the project.
3306
Linked OBJ file does not match the
compiled SPEL option.
The project configuration has been
changed. Rebuild the project.
3307 Duplicate function.
The same function name is used for more
than one file.
Correct the program
(function name).
3308 Duplicate global preserve variable.
The same global preserve variable name
is used for more than one file.
Correct the program (variable name).
3309 Duplicate global variable.
The same global variable name is used
for more than one file.
Correct the program (variable name).
3310 Duplicate module variable.
The same module variable name is used
for more than one file.
Correct the program (variable name).
3311
File cannot be found.
3312
OBJ file is corrupt.
3313
The specified file name includes
character(s) that cannot be used.
3314 Cannot open the file.
The file is used for other application.
Quit the other application.