Epson SC-F2000 User Manual

SC-F2000 Revision C
ADJUSTMENT Overview 195
Confidential
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
Damper Kit
Before
replacement
1 Turn the power on in Serviceman mode.
---
√√
2 Counter Reset
√√--- p. 221
3 Tube inner pressure reduction
√√√p. 234
4 Move the CR UNIT to the full side. (manually)
---
√√p. 69
Replacement 5 Replace with a new one.
---
√√p. 104
After
replacement
6 Clamp position adjustment ---
√
√
p. 233
7 Turn the power on in normal mode.
---
√
√
8 Initial ink charge √
√
√
p. 250
9 Nozzle Check & Cleaning √ PGPP
√√p. 237
Ink Holder Assy (Left/Right)
Before
replacement
1 Turn the power on in Serviceman mode.
---
√√
2 Counter Reset
√√--- p. 221
3 Remove the Ink Cartridges. => Close the cover.
---
√√
4Discharge
√√√p. 248
Replacement 5 Replace with a new one.
---
√√
p. 156
p. 161
After
replacement
6 Insert the Ink Cartridges. => Close the cover. ---
√√
7 Turn the power on in normal mode.
---
√
√
8 Initial ink charge
√√√
9 Nozzle Check & Cleaning
√
PGPP
√√
p. 237
Pump Cap Assy
Before
replacement
1 Turn the power on in Serviceman mode.
---
√ ---
2 Counter Reset
√√--- p. 221
3 Turn the power off.
---
√ ---
4 Move the CR UNIT to the full side. (manually)
---
√√p. 69
Replacement 5 Replace with a new one.
---
√√p. 143
After
replacement
6 Turn the power on in normal mode.
---
√ ---
7 IS Motor measurement
√√--- p. 282
Table 4-1. Adjustment Items and the Order by Repaired Part
Replaced or Repaired
(Reattached) Part/Unit
Required Operations
Service
Program
Jig Media Replaced Reattached Page

Epson SC-F2000 Specifications

General

Brand	Epson
Model	SC-F2000
Category	Printer
Language	English