EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Troubleshooting Troubleshooting procedure 82
Confidential
Setup Initialization selection to return to
initial settings
Copy settings
Do you want to initialize the copy settings?
---
Initialization selection to return to
initial settings
Scan settings
Do you want to initialize the scan settings?
---
Network setting in progress error
(Return the network settings to initial
settings)
The settings are being updated.
Please wait for some time.
---
Initialization selection to return to
initial settings
Network settings
Do you want to initialize the network settings?
---
Initialization selection to return to
initial settings
All settings
All settings will be initialized. This may take some time. Do you want
to perform initialization?
---
External memory External memory recognition not
possible
Notifies that the inserted external memory cannot be recognized. Take out the external memory.
Simultaneous operation execution error Notifies that since another function is running, the requested external
memory print function cannot be executed.
Make sure the running function has ended, and then
try again.
Copy Memory full error Notifies that since the memory was full, the copying process was
suspended.
Erase the memory. Ask the customer to delete
unnecessary files.
FAX Send memory storage error Notifies that the memory is insufficient during fax transmission before
the start of transmission.
[Supplement]
If an attempt is made to send documents exceeding 100 pages per
document, the transmission is complete at the 100th page, and the drafts
thereafter remain in ADF. (One-time transmission page specification =
Max. 100 pages)
Check the % display of the Fax Top screen, and if
the % display is not “0”, print the cumulative
document list, and check the documents
accumulated in the memory.
If unnecessary documents are remaining, delete
them to create space in the memory.
If the capacity of the drafts to be sent is large,
separate and transmit the drafts, or specify direct
transmission and send them without accumulating
in the memory.
Table 4-1. Normal errors
Category Error name Error details Error solution
To Next Page
Loading...
Need help?
General
