The following screen is displayed:
1. import/export data
2. Customisation of the display
Press to select the action to perform.
• : perform a backup
• : import a backup.
On the data import screen, it is possible to import the calibration gauge data of the tracing table
(option): .
Click to backup the jobs and tracer customization: .
Press to start the operation.
Once the backup is performed, a file is created on the backup key:
Product number L20XXX - Product serial number XXXXXX- Optician- Date “XX/XX/XXXX”-Time
"XXhXXmXXs"
Example: