The following screen is displayed:
1. Work area
Colours which may appear on screen:
◦ (green) Current shape (from the shape traced) and associated drilling points
(cyan) Current shape (obtained by symmetry with the shape traced) and associated drilling
points
◦ (yellow) Limit of the no-drill area
◦ (orange) Nasal or temporal side indicator
◦ (red) Selected drilling point
◦ (blue) Reference drilling point (by default, the first one created on each side – nasal and
temporal)
◦ A drilling point with a colour infill indicates non-through drilling
Binocular view
2. Active eye
The selected eye has an orange frame around it.
3. Type of drilling
◦ Drill-hole
◦ Slot
◦ Notch
4. Drilling coordinates
◦ X and Y coordinates in relation to the boxing
&
center of the shape.
◦ Distance between the center of the drill-hole entrance point and the edge of the lens.
◦ X and Y coordinates in relation to the reference drilling point.
To Next Page
Loading...
