Euphonix Max Air Mixing Console Operation Manual Busses
118
Copy Aux to Aux6.3.5
The settings from one Aux bus can be copied to another from this View.
Touch the 1. Copy Aux2Aux button.
The button illuminates.
Touch the Aux bus 2. from which the settings are to be copied.
Touch the Aux bus 3. to which the copied settings are to be pasted.
When nished, select other Aux busses to copy or select a different Aux function.4.
This effects only those channels on the surface.
Set Unity6.3.6
Selected Aux busses can be set to unity from this View.
Touch the 1. Level To Unity button.
The button illuminates.
Touch the Aux busses to set to unity.2.
When nished, select a different Aux function.3.
This effects only those channels on the surface.
Level To Off6.3.7
Selected Aux Busses can be set to unity from this View.
Touch the1. Level To Off button.
The button illuminates.
Touch the Aux busses to set to off.2.
When nished, select a different Aux function.3.
This effects only those channels on the surface.
Toggle Stereo6.3.8
Pairs of Aux busses can be set to stereo or toggled back to mono from this View.
Touch the 1. Toggle Stereo button.
The button illuminates.
Touch an odd numbered Aux bus followed by an even numbered Aux bus to toggle 2.
them to or from stereo.
The Aux busses indicate their new status.
When nished, toggle additional odd/even numbered pairs or select a different 3.
Aux function.
This effects all channels including those not on the surface.