Euphonix Max Air - Configuring aux Busses; Aux Bus Settings View; Aux to Faders

Euphonix Max Air Mixing Console Operation Manual Busses
116
Conguring Aux Busses6.3
Select the Busses Main Menu button, then select the Aux tab to display the Aux Bus
Settings shown in Figure 6-4. Each button pertains to a specic Aux function, which is
discussed in the following sections.
Aux Bus Settings ViewFigure 6-4
NOTE: The number of Aux busses (4 or 24) depends on the Mixer Model.
Aux to Faders6.3.1
It is now possible to control a selected Aux bus from the faders. Aux busses now have 12
dB of gain to match the range of the channel fader.
Touch the 1. Aux to Faders button.
The button illuminates.
Touch the desired Aux bus to map onto the faders.2.
The button illuminates.
When nished, select another Aux or select a different Aux function.3.
This stays enabled if you navigate to a different Touchscreen so touch Aux to Fad-
ers again to disable when nished.
This effects all channels including those not on the surface.