EasyManua.ls Logo

Euphonix Max Air - Assign Channels to Strips

Euphonix Max Air
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Euphonix Max Air Mixing Console Operations Manual Quickstart to Common Tasks
32
The eight boxes below show the channels controlled by this format (two for stereo,
L and R).
In the list of logical channels to the left, press the arrows to display the third page 4.
(channels 33–48).
To make the rst MF Master (labeled M1) control channels 33 and 34 simply se-5.
lect buttons 33 and 34 in the rst row and press the Set Format button.
The format displayed (in this case Stereo) on these channel buttons is St L and St
R, showing that these two channels can now be controlled as a stereo pair from
MF Master 1.
To set six channels to be controlled as a 5.1 channel is identical: just select the 5.1
format from the Format Selector and select six rather than two channels.
The MF Master can be named to correspond to the actual source. Touch the MF 6.
Masters button (they default to M1, M2, etc.) on the left and name them with the
keyboard popup (ST1, ST2 or with actual source names such as VTR1).
To assign the rest of channels to MF masters, repeat the process for each MF mas-7.
ter button.
Assign Channels to Strips3.3.2
Touch the 1. Surface menu button on the right side of the screen
Select the 2. Assign tab.
Select the 3. Select Range button.
To assign Channels to Strips:
Select the 4. 1–48 tab beneath the upper bank of buttons called Channels. Select
channels 1–16 from the bank by pressing channel 1 button and then 16.
All 16 channels are selected.
Select the 5. Main tab beneath the lower bank of buttons called Strips. Touch the
Strip 1 button to select and assign the 16 channels in the upper bank to the 16 main
strips on the lower bank.
Select channels 6. 17–32 from the upper bank of channel buttons. Select the Swap
tab beneath the lower bank of strip buttons. Touch Strip 1 to assign channels 17–32
to the rst 16 Swap channels.
The Swap designations light up just beneath the Swap button on each of the rst
16 Strips on the control surface.
To assign MF Masters to Strips:
Select the 7. MF Masters tab from beneath the upper bank of buttons

Table of Contents

Other manuals for Euphonix Max Air

Related product manuals