Euphonix Max Air - Status; Fader Unity Popup

Euphonix Max Air Mixing Console Operation Manual Touchscreen
78
Fader Unity popupFigure 4-34
Select Strip View or Channel View to view strips or channels, respectively. Select one
or more Strips or channels to set to unity gain. Use the Main, Swap, and Center tabs
to select the strip/channel type. Use the Select All, Select None, and Select Range but-
tons (see page 76) to assist your selection. Touch the Set Unity button to set the selected
faders to 0 dB. Touch the Level To Off button to set the selected faders to the down or
off position.
Status4.9
Touch the Status Main Menu button to display the Status View.
When a system error occurs and the user is not in the Status View, the Status Main Menu
button turns red, alerting the user to inspect the Status View.