Euphonix Max Air Mixing Console Operation Manual Scene Automation
164
over again to sequence through all the scenes.
Note that non-continuous parameters, such as switch status, change as soon as a Scene
snapshot is recalled. In addition, there are no restrictions on executing Scenes while
another Scene’s snapshot is still “gliding” to its nal setting. Thus, it is possible that
multiple Scenes may be gliding simultaneously.
For example, if Scene 1 has a snapshot gliding fader A from -∞ to 0dB in 10 seconds, and
1 second later, Scene 2 is red and it glides fader B from -∞ to 0dB in 2 seconds, fader
B’s glide will nish 7 seconds before fader A
Finish10.1.7
Finish completes all outstanding glides. It is used to quickly jump to a Scene’s snapshot
values for editing purposes.
Previous and Next10.1.8
Previous and Next buttons are used to navigate through the Scene List. They do not
execute (or Take) any scenes.
To Next Page
Loading...
