Euphonix Max Air - MIX Minus; MIX Minus Configuration-Strips View

Euphonix Max Air Mixing Console Operation Manual Busses
119
Mix Minus6.4
Select the Mix Minus tab to display the Mix Minus Conguration View. Touch the Strip
View or Channel View buttons (1 in Figure 6-5) to display strips and channels, respec-
tively. The Mix Minus feature allows a broadcaster to hear all channels except their own
(see page 108 for a complete explanation of this feature).
Mix Minus Conguration-Strips ViewFigure 6-5
Touch the arrows to select the Main, Swap, or Center levels (3).
Touch one of the four banks of 16 channels/strips to assign them to the Soft Knobs. The
top bank (2) is selected in Figure 6-5. The Soft Knobs are represented by the lowest two
rows labeled Mix Minus View (4). The knob sets that channel’s level sent to the mix
minus bus.
Push the Pre button down (illuminates) to set the level to pre-fader. When the Pre button
is up (not illuminated), the level is post-fader.
4
3
2
1