Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual Center Section
144
Speaker Selection7.5.5
The AFL and PFL solo signals can be routed to the following speakers by activating their
respective keys (4 in Figure 7-18) in the Solo Setup popup:
None• : The solo signal is not sent to a speaker but the solo bus can be routed to
other destinations using the Patch View.
Alt 1• : The solo signal is sent to the Alt1 speaker.
Alt 2• : The solo signal is sent to the Alt2 speaker.
Follow Control Room• : The solo signal follows the active control room speaker
selection (Main, Alt1, or Alt2).
Solo Speaker Dim7.5.6
In AFL and PFL modes, the speakers not fed by the solo signal can be dimmed. Touch
the Dim Control Room when Alt1 or Alt2 is selected button (5 in Figure 7-18) in the
Solo Setup popup.
Solo-Safe7.5.7
Solo Safe PopupFigure 7-19
Solo-Safe is used with the Solo-In-Place mode and has no effect in AFL or PFL modes.
Solo-In-Place mode effectively mutes all channels except the soloed channel. Designat-
ing a channel Solo-Safe allows it through to the Main busses even when another signal
is soloed. Solo signals can be heard with effects if the effects returns are designated
Solo-Safe.

Euphonix Max Air Specifications

General

Brand	Euphonix
Model	Max Air
Category	Music Mixer
Language	English