Euphonix Max Air - Lock Strips; Fader Unity; Lock Strips View

Euphonix Max Air Mixing Console Operation Manual Touchscreen
77
Lock Strips4.8.4
Select the Lock Strips tab to display the Lock Strips View (Figure 4-33), which pro-
vides the ability to prevent strips from being affected by Layout recall.
Lock Strips ViewFigure 4-33
Select one or more Strips to lock. Use the Main and Center tabs to select the strip type
(Main locks both Main and Swap). Use the Select All, Select None, and Select Range
buttons (see page 76) to assist your selection. There is no Close button; just select an-
other view and this information is retained.
Fader Unity4.8.5
Select the Fader Unity tab to display the Fader Unity popup (Figure 4-34), which allows
setting the fader on designated strips and channels to 0 dB.