Euphonix Max Air - Keypad; CM404 Keypad

Euphonix Max Air Mixing Console Operation Manual Center Section
148
Keypad7.8
The keypad is used to recall Layouts, Snapshots, custom (*) channel strip Knobset pag-
es, trigger Custom events, or recall channels to the Super Channel.
Layouts
SetupOne Shot
CustomSnapshots Knobsets
7
4
1
Clear 0
2
5
8 9
6
3
Enter
CM404 KeypadFigure 7-23
Press the Layouts, Snapshots, Knobsets, or Custom keys to recall those respective
functions. That key remains active (lit) until another key is pressed or that key is pressed
again. If none of the four keys are lit, then the keypad assigns a channel to the Super
Channel.
If the One Shot key is off, the keypad acts as a normal numeric keypad. Press the desired
number and then press the Enter key. Press Clear to cancel all entered numbers. The
numbers display in the lower-right Keypad area of the Touchscreen.
If One Shot is on, the 1–9 keys immediately recall without pressing Enter. The Keypad
area of the Touchscreen shows the rst nine layouts, snapshots, custom knobset pages,
or Custom key names.