Euphonix Max Air - 5.2 Channel Control Features

Euphonix Max Air Mixing Console Operation Manual Channels and Strips
91
Assign Channels to Strips5.1.1
Each strip can control a Main and Swap channel. One or both of the channels can be a
Control Group Master or Multi Format Master instead of a normal channel (see Chapter
8: Control Groups and Multi Format Masters). Channels can be assigned individually
using the strip controls or to multiple strips using the Surface - Assign View (see Chan-
nels on page 74) from the Touchscreen.
Surface Assign View
The Surface - Assign View on the Touchscreen is most commonly used to assign chan-
nels to multiple strips but can also be used for a single assignment.
Select 1. Channels from the Main Menu buttons.
Select the 2. Assign tab.
Surface Assign ViewFigure 5-2
In the 3. Surface Assign View, select the channel to assign from the Channels bank.
Select the strip to assign the selected channel to from the 4. Strips bank.