Euphonix Max Air - Page 64

Euphonix Max Air Mixing Console Operation Manual Touchscreen
64
Select the Destinations
There can be:
one source to one destination;•
an equal number of sources to destinations;•
one source to multiple destinations.•
Multiple sources cannot be routed to one destination.
To set the destinations for the 12 mics:
Select the 4. Console I/O tab (1 in Figure 4-20), then select the A and B Inputs sub-
category (2).
Select the 5. 17–32 tab to display those channels.
Select channels 25–32 by touching and dragging through the 6. A Input column next
to C25–C32.
Select the 7. 33–48 tab to display those channels.
Select channels 33–36 by touching and dragging through the 8. A Input column next
to C33–C36 (3 in Figure 4-20).
The entries are highlighted in green and the list of A input channels appears in the
Destinations column in the Selected Sources and Destinations area (4 in Figure
4-20).