Evoqua DEPOLOX - Page 119

DEPOLOX
®
Pool Functions
WT.050.570.000.DE.IM.0714 119
2.6
Starting adaption 1. Starting from the basic display, select the "Adaption" menu item
from the "Cl
2
" menu.
The parameters Tu, Ts, TU
ECO
and TS
ECO
are displayed.
2. In the "Cl
2
Adaption" menu select the menu item "ADAPT".
The diagram of the previous adaption is displayed
3. To start the adaption press "START".
Adaption starts.
Fig. 37 Adaption
Displays The diagram shows the chlorine value curve during the adaption pha-
ses.
The current phase of adaption (total of 13) is shown in the bottom line.
Successful adaption is confirmed by the "ADAPTION OK" message.
Press the "BACK" softkey to return to the basic display.
If adaption is not successful, the error message "ADAPTION?" is dis-
played.
C l 2 A D A P T I O N
1 8 . 0 5 . 0 2
A D A P T
Z U R Ü C K
0
2 2 h
P O O L 1 A D A P T I O N
1 , 0 0
1 8 . 0 5 . 0 2
A b b r u c h
0 , 2 8
m g / l
y = 0 %
X = 2 7 %
M E N Ü
2 : X = 2 0 %
1 8 h
1 4 h
T u 0 6 m i n 3 0 s
T s 0 0 h 5 8 m i n 2 0 s
T u E C O 0 6 m i n 3 0 s
T s E C O 0 0 h 5 8 m i n 2 0 s
E I N G A B E
S T A R T
A D A P T
0 , 5 0